This transaxle has been in the Alien since 2003. Rebuilt by Brad Mayer. It has an HB 5th gear and a billet intermediate plate.

Full disclosure: The large nut on the main shaft backed off some how and was bouncing off the ring & pinion gears. I discovered it in time. The only damage was some dings on the gears. I cleaned them up with a die grinder and ran this unit hard behind the Euro Spec "S" 928 engine for 22 years.

This will not bolt into your car. The bellhousing has been cut off to allow it to mate up to the 928 engine. This is a parts transaxle only. I am selling it for the HB 5th gear and the billet intermediate plate and anything else you want to scavenge from it.

Click to view attachment
Click to view attachment

This photo is from the last time I drove the car before pulling the engine is 2022.
Click to view attachment

Looking for 550.00 plus shipping or best offer.

Oh nice tempting

I don't even know where you would would get a billet intermediate plate .

Martin Bott:

https://www.bott-parts.de/fahrzeugtyp/porsc....-gehaeuse?c=17

Intermediate plates are actually available at a few places. Patrick Motorsports machines their own, CMS has one, and other places as mentioned above. They are typically ~$400-550.

Good deal, GLWTS.

I think I paid 350.00 for the HB gear. So that's like 850.00 in 2 parts. Add in the other gears and synchros and it's not too bad. This unit shifted fine. Make an offer if you can use the parts

Oops misread this

for the weekend

Halloween Bump

Billet intermediate plate $ 450.00
HB 5th gear $ 350.00 sold as a package.

$ 800.00 plus shipping. Make an offer

I run a flipped HB and get more than 30 mpg on the interstates that link me to teener events. With a light foot admittedly, but the speed limits are already 80-85 mph. Such a deal.

What would HB do in a 914-6? Not sure if it would benefit me or not

Let me ask a guru. I will get back to you. I had my box set up like that to slow the engine RPM's at highway speeds. I didn't need the 4 rear ratio (RPM's) to assist with a cooling fan. Makes 140 MPH a blast!

Put it this way, speed limits are now often north of 80 mph. Since I sometimes like to cruise cross country I can combine the tall gear with the 3.2 torque for a more relaxed feel as I keep up with the pickup trucks.

Looks like Worn has this setup.

Great Parts!

The HB gear sells for $ 350.00 alone

Is it limited slip? Just noticed 2 tire fire on the burnout