 Major difficulty getting into reverse and first. It was working and then it wasn’t. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| 914xr75 |
 Aug 5 2026, 12:14 PM
Post
#1
|
|
Member  Group: Members Posts: 230 Joined: 24-March 18 From: Whittier, CA Member No.: 21,996 Region Association: Southern California  |
My daughter’s 73 is having a very hard time shifting into reverse and first. A couple years ago I replaced all the bushings down below, but I did not replace anything in the console area.
While going about 2 miles an hour, I can get it into first, but reverse is very difficult. I’ve got it up on jackstands right now and I’m about to put my level one mechanical eye on it. Just thought I’d throw this out in case anyone knows what I need to look for before I get down under Lil’s 914—-again. She’ll be helping me this time. |
   |
 
|
| Jack Standz |
Aug 5 2026, 02:56 PM
Post
#2
|
|
Senior Member Group: Members Posts: 896 Joined: 15-November 19 From: Happy Place (& surrounding area) Member No.: 23,644 Region Association: None 
|
Maybe the first place to look is where the front and rear shift rods connect under the rubber boot by the firewall. Is the cone screw loose? Also, check the bushing there and all the bushings back to the transmission.
|
|
|
|
|
5 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
|
Lo-Fi Version | Time is now: 5th August 2026 - 02:58 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.